Commissioning
47
7
4. Setting the hydraulic operating mode:
a) Constant flow (delivery condition)
Connect the free return line [1] and the pressure line [2] with BG3 male
couplings with the respective tractor couplings.
The adjustment screw is unscrewed up to the limit stop at the hydraulic
block.
The adjustment screw is secured with a counter nut.
The load sensing line [3] is not in use. Safely store the hose on the cable
tray of the machine.
Figure 7.4: Untightened adjustment screw at the hydraulic block for KS
b) Load sensing operation (Power Beyond)
- Release the counter nut of the adjustment screw at the hydraulic block.
- Completely screw in the adjustment screw at the hydraulic block.
- Tighten the counter nut.
- Fit the pressure line [2] with a BG4 male coupling. The BG4 male coupling
is supplied with the machine.
- Connect the free return line [1], the pressure line [2] and the load sensing
line [3] to the respective tractor couplings.
NOTICE
The hydraulic line connections are form-fit. Always connect suitable connectors.
The connections and coupling heads of the lines must be clean.
To Next Page
Loading...
