Commissioning 7
52
Figure 7.7: Mounting position and height during normal fertilisation
The following applies:
3.
If the maximum admissible mounting height of the machine is exceeded in the
normal fertilisation mode, or if the mounting heights A and B cannot be reached:
The machine is to be mounted according to the
late fertilising
values.
AXIS H 30.2 EMC,
AXIS H 30.2 EMC + W
AXIS H 50.2 EMC + W
A + crop height ≤ V Max. 1040 mm Max. 990
B + crop height ≤ H Max. 1040 mm Max. 990
To Next Page
Loading...
