Commissioning 7
64
Example for limited border spreading during late fertilising:
Figure 7.18: Limited border spreading during late fertilising
During limited border spreading in late fertilising, almost no fertiliser goes beyond
the field boundary. Underfertilisation at the field boundary must be accepted in
this case.
The following settings are to be applied to the machine according to the fertiliser
chart:
Specified parameters:
Type of fertiliser: KAS BASF
Application rate: 150 kg/ha
Working width: 24 m
Forward speed: 12 km/h
Mounting height: 0/6 (A = 0 cm, B = 6 cm)
Drop point: 6.5
Metering slide adjustment: 90 left, 72 right
1
1. Recommended quantity reduction of 20 % on limited border spreading side
Spreading disc type: S4
Spreading disc speed 900 rpm
Limited border spreading disc speed: 600 rpm
To Next Page
Loading...
