Spreading operation 8
86
Driving out of the headland tramline
Open the metering slides if the following requirement is met:
- The end of the spreading fan on the field [E] is at approx. half of the work-
ing width + 4 to 8 m from the field boundary of the headland.
The tractor is then located at different distances in the field, depending on the
spreading distance of the fertiliser.
Driving into the headland tramline
Close the metering slides as late as possible.
- The end of the spreading fan should ideally lie on the field [A] at a distance
of approx.4 to 8 m further than the working width [X] of the headland.
- This cannot always be achieved, depending on the spreading distance of
the fertiliser and the working width.
Alternatively, drive beyond the headland tramline, or lay out a 2nd headland
tramline.
Follow these instructions in order to ensure an environmentally friendly and eco-
nomical working method.
To Next Page
Loading...
