Spreading operation
91
8
Agitator not working.
Check agitator drive. See 9.8: Checking the agitator
drive, page 105
Blockage of the metering open-
ings due to: fertiliser clumps,
damp fertiliser, miscellaneous im-
purities (leaves, straw, sack resi-
dues)
Clear blockages. Proceed as follows:
1. Park tractor, remove ignition key.
2. Open metering slide.
3. Place collecting vessel underneath.
4. Remove spreading discs.
5. Clean the outlet from below with a wooden pole or the
adjustment lever and push through the metering opening.
6. Remove any foreign objects in the hopper.
7. Install spreading discs, close metering slides.
Fault Possible cause/action
To Next Page
Loading...
