Rauch AXIS-M 30.2 - Page 124

Maintenance and service 10
116
Before opening the protective grid:
 Disengage the PTO shaft.
 Lower the machine.
 Turn the tractor motor off. Remove the ignition key.
Figure 10.9: Open the protective grid lock
 Execute a regular function check of the protective grid lock. See figure below.
 Immediately replace defective protective grid locks.
 If required, correct the setting by moving the protective grid lock [1] up/down
(see figure below).
Figure 10.10: Test dimension for functional check of the protective grid lock
1...2 mm
1