Technical data
29
4
4.4 List of available accessories
4.4.1 Extensions
You can increase the capacity of the basic equipment by fitting a hopper exten-
sion.
The extensions are bolted to the standard hopper.
4.4.2 Hopper cover
A hopper cover can be fitted to protect the spreading material from humidity.
The hopper cover is screwed both to the main hopper as well as to the addition-
ally mounted hopper extensions.
NOTICE
We recommend that you have the extra equipment fitted and mounted on the ba-
sic machine by your supplier or an authorised service centre.
NOTICE
The available special equipment depends on the country of use of the machine
and is not listed fully here.
Contact your dealer/importer if you need specific special equipment.
NOTICE
An overview of the extensions can be found in chapter 4.3.3: Technical data of
the extensions, page 28.
Hopper cover Application
AP-L 25, foldable
Standard unit
Extensions: L603
1
, L800, L1500
1. A supplementary hopper cover is necessary for this extension.
AP-XL 25, foldable Extensions: XL1103
1
, XL1300, XL1800
To Next Page
Loading...
