Rauch AXIS-M 30.2 - 7 Commissioning; Accepting the Machine

Commissioning
41
7
7 Commissioning
7.1 Accepting the machine
When accepting the machine, please check the completeness of the delivery.
The standard equipment includes:
 1 mineral fertiliser spreader of the AXIS series,
 1 operator's manual AXIS 30.2/40.2
 1 calibration kit including chute
 Lower link and upper link pins
 1 spreading disc set (according to order)
 1 universal drive shaft (including operator’s manual)
 1 agitator
 Protective grid in hopper
 Version Q or W: QUANTRON-A control unit (including operator's manual)
 Version C: E-CLICK control unit (including operator's manual)
 AXIS 30.2/40.2 EMC (+ W): QUANTRON-A M EMC control unit or ISOBUS
terminal with AXIS EMC ISOBUS machine control unit (including operator's
manual)
Please also check any optional equipment that you ordered.
Check for any shipping damage or missing parts. Have any shipping damage
confirmed by the forwarding agent.
If in doubt, contact your dealer or the factory directly.
NOTICE
When receiving the machine, check that all attached components are correctly
and tightly seated.
The right-hand spreading disc and left-hand spreading disc must be mounted
facing the direction of travel.