Rauch AXIS-M 30.2 - Maximum Admissible Mounting Height at Front (V) and Rear (H)

Commissioning 7
54
7.6.2 Maximum admissible mounting height at front (V) and rear (H)
The maximum admissible mounting height (V + H) is measured from the
ground to the lower edge of the frame.
Figure 7.9: Maximum admissible mounting height V and H during normal and
late fertilising
The maximum admissible mounting height depends on the following factors:
 Normal fertilisation or late fertilising.
Maximum admissible mounting height
V [mm] H [mm]
Normal fertilisation 1040 1040
Late fertilising 950 1010
V
H