Rauch AXIS-M 30.2 - Page 136

Maintenance and service 10
128
 PTO drive and tractor engine are stopped, the ignition key of the tractor is re-
moved.
 When draining the oil, have a sufficiently large collecting vessel (approx. 11l)
ready.
Figure 10.22: Transmission oil filling and draining points
[1] Filling screw
[2] Oil level checking screw
[3] Drain screw
Checking the oil level
 Open the oil level checking screw.
 The oil level is satisfactory when the oil reaches the lower edge of the
hole.
Draining oil:
 Tilt the machine sideways (tilt approx. 200 mm).
 Position the collection vessel under the oil drain plug.
 Open the oil drain plug and let the oil drain out completely.
 Close the oil drain plug.
1
2
3