Commissioning
61
7
Example of field spreading during normal fertilisation:
Figure 7.13: Field spreading during normal fertilisation
During field spreading in normal fertilisation mode, a symmetrical spreading pat-
tern is produced. If the spreader is correctly set (see information in the fertiliser
chart), the fertiliser is evenly spread over the field.
The following settings are to be applied to the machine according to the fertiliser
chart:
Specified parameters:
Type of fertiliser: KAS BASF
Application rate: 300 kg/ha
Working width: 24 m
Forward speed: 12 km/h
Mounting height: 50/50 (A = 50 cm, B = 50 cm)
Drop point: 6
Metering slide adjustment: 180
Spreading disc type: S4
PTO speed: 540 rpm
To Next Page
Loading...
