Rauch AXIS-M 30.2 - Page 98

Spreading operation 8
90
Figure 8.9: Section control example
[1] Field edge
[2] Sections 1 to 4: successive section width reduction on the right
[3] Tractor track
NOTICE
The VariSpread compatible machine is equipped with two electrical drop point
actuators. Via the QUANTRON-A control unit or with the ISOBUS machine con-
trol unit, you can specify the settings of the sections and achieve accurate
spreading operation results in wedge-shaped fields.
 More detailed information about possible settings of the sections is provided in
the operator's manual of your electronic control unit (QUANTRON, ISOBUS).
1
2
2
3
3
4
4
1
2
3