Ravas RCS User Manual

USER MANUAL – RCS
23
NET
kg/lb
NET
kg/lb
23 sec.
NET
kg/lb
NET
kg/lb
8. Settings
8.1 Determining the capacity of the truck
The graduation of the indicator depends on the capacity of the lift truck.
The European directives for weighing systems state that the machine stickers should show the
producer, the capacity and the graduation. The kit contains a number of stickers with different
capacities and graduations.
• For a capacity of 2500 kg the weight is shown in 10 kg steps;
• For a capacity of 5000 kg the weight is shown in 20 kg steps;
• For a capacity of 10000 kg the weight is shown in 50 kg steps.
Important !
If the lifting capacity of the forklift truck is different then the above-mentioned e.g. 1500 kg or 3000 kg,
a higher capacity should be chosen.
For 1500 kg the capacity will be 2500 kg; for 3000 kg it will be
5000 kg.
If you choose a setting and machine sticker with a smaller capacity, and therefore a smaller
graduation, then the measurement range and accuracy will not be in accordance with the
specifications.
The standard setting of the indicator is a capacity of 2500 kg and a graduation of 5 kg. The following
procedure should be followed to change the settings.
8.2 Interval setting
2
3
4
1
Switch off the indicator
with the on/off key.
Push the on/off key.
(Don’t let go)
Confirm P02
The indicator shows the
graduation: 5 (5 kg)
5 for capacity 2500 kg.
1 x

Ravas RCS Specifications

General

Brand	Ravas
Model	RCS
Category	Measuring Instruments
Language	English