USER MANUAL – RCS
min -10°C
15°F
0
0
max 40°C
105°F
6.5 The condition of the mechanical parts of the fork-lift truck
After you have installed the RCS on the forklift truck, the truck will be part of the weighing system.
Especially the mechanical parts of the forklift truck, such as the mast, the mast rollers and the ball
bearings can influence the accuracy of the weightings.
Because of this it is important to keep the parts in good condition;
- make sure there is no local friction in the mast of the forklift;
- keep the system clean;
- make sure you get a good lubrication of the mast and the chains;
- take care for regular maintenance so that the condition of the system is constant;
- lifting and lowering of the forks should be as silent as possible.
To Next Page
Loading...
Need help?
General