CHAPTER 5
34 Hawkeye® 2 Installation Manual for AGCO RoGator C-Series (RG900, RG1100, RG1300)
3. Secure the RCM - Sprayer (P/N 063-0173-956) to the plate using the supplied bolts (M6 x75mm (qty 2), M6 x
65mm (qty 1), and flanged nylon lock nuts (qty 3)). It is recommended to mount the RCM - Sprayer to the inside
of the mounting plate.
FIGURE 2. RCM - Sprayer Mounted
RCM - SPRAYER MOUNTING WITH FOAM MARKER
1. Remove the four bolts from the bottom of the foam marker mounting bracket and remove the foam marker.
FIGURE 3. Remove the Foam Marker
To Next Page
Loading...
