5
Install the Hawkeye® 2 RCM - Sprayer: RCM - Sprayer Installation 37
INSTALL THE HAWKEYE® 2 RCM - SPRAYER
ECU CABINET PREPARATION
1. Locate the ECU Cabinet on the right side of the machine between the axles and remove the cover.
FIGURE 6. RoGator 1300 ECU Cabinet Location
2. Locate the Raven ISO Product Control ECU.
3. Use a socket and socket extension to loosen the bolt securing the ECU mounting plate to the rear cabinet wall
and remove the plate from the electrical box.
FIGURE 7. ECU Mounting Plate
Raven ISO Product Controller ECU
To Next Page
Loading...
