21
12. DATA MENU
The following are brief descriptions of features available under the DATA MENU
key (some features are only available on consoles with serial interface port):
DISPLAY
RATE DATA FEATURE and DESCRIPTION
Prn bEGn CONSOLE DATA PRINTOUT
Sends data through serial port to attached optional printer
to print field begin and field end pages (Serial interface
console only).
ALrn on AUDIBLE ALARMS ON/OFF
Turns audible alarms ON or OFF for the following:
1) Volume/Area Rate Alarm
2) Volume/Minute Rate Fault
3) Low Tank Fault
diSP on DISPLAY SMOOTHING ON/OFF
Turns display smoothing ON or OFF. Selecting display
smoothing ON means the RATE window displays target rate when
actual rate is within a percentage of target rate. The third
digit of VALVE CAL determines this percentage.
rATE on RATE CHANGE ALARM ON/OFF
Turns rate change alarm ON or OFF. When rate change alarm
is selected ON; alarm sounds 4 long beeps when the rate 1
calibration number is changed via the serial port using a
valid change request data string (Serial interface console
only).
FILE 1 GPS FILE REFERENCE
Used only with Raven Grid Application System. See Grid
Application System manual for more details (Serial inter-
face console only).
GPS InAC GPS OPTIONS
Used only with Raven Grid Application System. See Grid
Application System manual for more details (Serial inter-
face console only).
FrEF 0 FIELD REFERENCE
Allows user to enter up to a four-digit number to represent
a field. Field reference is included in field begin and
field end pages and the data logger time/date string (Serial
interface console only).
To Next Page
Loading...
Need help?
General
