Raven SCS 4600 - Programming CANbus Nodes; CAN Troubleshooting; CAN Node Off-line Errors

21
UNSHIFT SHIFT UNSHIFT SHIFT UNSHIFT SHIFT
RATE DISPLAY 00000 0000.0 00000 0000.0 0000.0 0000.0
RATE CAL 00000 0000.0 00000 0000.0 0000.0 0000.0
TANK VOLUME 000000 00000.0 000000 00000.0 00000.0 00000.0
TOTAL AREA 000.0 000.0 000.0 000.0 0000 0000
TOTAL VOLUME 000000 00000.0 000000 00000.0 00000.0 00000.0
FIELD AREA 000.0 000.0 000.0 000.0 0000 0000
FIELD VOLUME 000000 00000.0 000000 00000.0 00000.0 00000.0
VOL/MINUTE 0000 000.0 0000 000.0 000.0 000.0
AREA/HOUR 000.0 000.0 000.0 000.0 0000 0000
RATE +/- 0000 000.0 0000 000.0 000.0 000.0
LOW TANK LEVEL 0000 000.0 0000 000.0 000.0 000.0
LOW VOL/MIN 0000 000.0 0000 000.0 000.0 000.0
US METRIC TURF
DECIMAL PLACE LOCATIONS**
** When entering RATE CAL, remember that 200 PPA [kg/ha] is entered as 200 when unshifted and 200.0
when shifted.