Raychem C910-485 - 4.2 Console Mode Menus: High Temp Cut-out & Alarm; 4.2 Console Mode Menus: HI Limit Settings Keystrokes

nVent.com | 30
4.2.12 High Temperature Cut-out, Setpoint and Alarm
(HI Limit TS1/HI limitTS2)
Purpose
Set high temperature alarm and cut-out values.
Settings/Ranges:
Enable/Disable HI Limit
Set point: 0°F (-18°C) to 200°F (93°C)
Enable/Disable Alarm
Factory Defaults:
Disable
200°F (93°C)
Disable