Raychem C910-485 - 4.2 Console Mode Menus: Ground-fault Current Trip Level; 4.2 Console Mode Menus: GF Trip Setpoint Keystrokes

nVent.com | 35
4.2.17 Ground-fault Current Trip Level (Hi GF Trip)
Purpose
This allows the user to set the ground-fault current trip level.
Exceeding this limit will result in the output switch being latched off
and the G
round-fault Level Trip Alarm activated to indicate a ground
fault condition.
WARNING: Fire Hazard. Ground-fault trip alarms must not be
ignored. To
prevent the risk of fire, do not re-energize heating cables
until the fault is identified and corrected.
Alarm time delay filter is factory set as immediate
Setting/Range
20 mA to 100 mA
Factory Default
30 mA