Raychem C910-485 - 4.2 Console Mode Menus: Temperature Sensor Control Mode; 4.2 Console Mode Menus: TS CLT Mode Keystrokes

nVent.com | 37
4.2.19 Temperature Sensor Control Mode (TS CLT Mode)
Purpose
The TS CONTROL MODE allows the selection of one of eight
possible temperature control modes for the controller. The different
modes allow redundant fail-safe temperature sensing.
Setting/Range
1. TS1-Fail ON
2.
Lowest Fail to Good
3.
Lowest Fail ON
4.
Average Fail to Good
5. Average Fail ON
6.
TS2 Fail to TS1
7.
TS2 Fail ON
8. TS1 Fail to TS2
Factory Default
TS1-Fail On