Raycus RFL-C2000S-HP - Operation and Control; Front and Rear Panel Overview

Wuhan Raycus Fiber Laser Technologies Co., Ltd
User Guide
RFL-C2000S-HP /RFL-C3000S-HP /RFL-C4000S-HP/RFL-C6000S-HP
16
 The lens and cutting head cavity must be clean and free of
contamination before the laser output optical cable is assembled.
 Keep the protective cap on the output head in a safe place to prevent it
from being contaminated; otherwise indirect contamination of the output
head will occur when the cap is closed.
4 Guiding
Please use the new version of the Raycus software and the
instruction manual for the Raycus software.
4.1 Front panel
Figure 4 shows the front panel style of the
RFL-C2000S-HP/RFL-C3000S-HP/RFL-C4000S-HP/RFL-C6000S-HP laser (take C6000S as an
example):