Wuhan Raycus Fiber Laser Technologies Co., Ltd
User Guide RFL-C2000S-HP-RFL-C6000S-HP
4
1 Safety Information
Thank you for choosingRaycus fiber laser. This User Guide provides important safety,
operation, warranty and other information. Please read it carefully before you use this product. In
order to ensure safe operation and optimal performance of the product, please follow the
warnings, cautions, operating procedures and other instructions accordingly.
1.1 Symbols Used in this User Guide
WARNING: Refers to a potential hazard that may leads to a
personal injury or death.
CAUTION: Refers to potential a hazard that may leads to
aminorpersonal injury or product damage.
1.2 Laser Classification
This series of lasers areclassifiedas a high power Class 4 laser instrument according to the
European Community standards EN 60825-1, clause 9. This product emits invisible laser
radiation at or around a wavelength of 1080 nm, and the total light power radiated from the
optical output is greater than 300W~6000W (depending on model). Direct or indirect exposure
of this level of light intensity may cause damage to the eyes or skin. Despite the radiation being
invisible, the beam may cause irreversible damage to the retina and/or cornea. Appropriate and
approved laser safety eyewear must be worn all the time while the laser is operating.
WARNING: The laser safety eyewearshall be used when this
device is operating. Thelaser safety eyewear is selected according to the
range of wavelengths emitted from this product. The end user must
ensure that the laser safety eyewear being used protects against light
emitted by the device over its entire range of wavelengths. Please verify
that the personal protective equipment (e.g. enclosures, viewing
windows or viewports, eyewear, etc.) being utilized is adequate for the
output power and wavelength ranges listed on the product.
1.3 Safety Labels
The safety labels is as shown in Figure 1:
To Next Page
Loading...
Need help?
General
