Notice
The exhaust power available for the application will be reduced by e. g. bends, small hose
diameters and long hoses.
You should therefore note the following:
– Avoid bends.
– Keep hose as short as possible.
– Use hose diameters as large as possible.
Applications generating large amounts of dust or fumes may require a stronger exhaust system.
Use of separate exhaust systems for head and table exhaust may also be necessary.
In this case it is absolute necessary to consult your distributor.
3.2 Materials
List of material
Material EN Material DE Cutting Engraving Marking
Metal
Aluminum Aluminium
Aluminum, anodized Aluminium, eloxiert ✓
Chromium Chromium Verchromte
Oberflächen
Precious metal Edelmetalle
Metal foils up to 0.5mm
(Aluminum, Brass,
Copper, precious metal)
Metallfolien bis zu 0,5mm
(Aluminium, Messing,
Kupfer, Edelmetall)
Stainless steel Edelstahl
Metal, painted beschichtetes Metall
(lackiert)
✓
Brass Messing
Copper Kupfer
Titanium Titan
ENGLISH
ENGLISH
29 / 81
To Next Page
Loading...