8 Maintenance
8.1 Safety notes
Danger
Improper maintenance can cause serious injury or damage.
Maintenance may be carried out only by authorized, trained personnel who are familiar with how
to operate the machine and in strict observance of all safety notes.
Danger
Risk of fire or explosion.
Improper handling of the machine may cause fire or explosion.
– For cleaning the machine, do not use explosive or flammable substances or cleaning
agents.
– No flammable or explosive liquids may be stored in or near the machine.
– Always keep the system clean, and remove flammable parts from the working area or
exhaust area.
Warning Dangerous electrical voltage
Danger of electrical shock.
Work on electrical fittings may be carried out only by qualified personnel and in strict
observance of the safety notes.
Before any maintenance work takes place, disconnect the machine from the mains voltage and
make sure the system is de-energized.
IMPORTANT NOTE ON MACHINE SAFETY:
Notice
The safety devices of the laser system must be replaced due to component aging or
corresponding (e.g. > 72,000 lid cycles / anno), the safety equipment of the laser system must
be replaced by an authorized technician after 10 years at the latest, otherwise safety can no
longer be guaranteed. Without measures, the operating license will expire.
8.2 Maintenance schedule
System Components Daily Weekly Half-yearly Yearly
Lens,
mirror #2 and mirror #3
✓✓
Mirror #1 ✓✓
Working table and rulers. ✓✓
ENGLISH
ENGLISH
59 / 81
To Next Page
Loading...