Rayjet R500 - Position of the lens

81 pages

Save Page as PDF

To Next Page

To Previous Page

7.6 Position of the lens

Assembly without lens Assembly with a 2.0 inch lens Assembly with a 4.0 inch lens

Notice

Make sure that the lens is placed with the convex side facing upwards.

ENGLISH

56 / 81

Main Page

Table of Contents5
General Information8
Information about this Manual8
Explanation of Symbols9
Liability and Warranty10
Scope of Delivery (Standard Configuration)11
Type Plate12
Safety13
General Safety Notes13
Intended Use13
Improper Use13
Residual Risk14
Machine Modification14
Operating Modes14
Applicable Safety Regulations15
Laser Safety16
Laser Classification16
Areas of Responsibility17
Responsibilities of the Operator17
Responsibilities of the Operating Personnel17
Requirements for Operating an Service Personnel18
Machine Identification (Warning and Safety Stickers)18
Safety Devices21
Technical Protective Measures21
Main Switch21
Key Switch21
Emergency Stop Button21
Interlock Safety Switches22
Acrylic Top Lid22
Side Cover22
In Case of Safety Device Malfunction22
Secondary (Indirect) Hazards23
Fire Hazard23
Gases, Fumes and Dust23
Reflection through Materials24
Hazards Due to Damaged Optics25
Protective Measures for Damaged Optics25
In Case of Emergency26
Technical Data27
Exhaust System Requirements28
Materials29
Machine Overview33
General Overview33
Laser Power Potentiometer34
Tables34
Cleaning Drawer35
Lens(Es)35
Nozzles35
Transport36
Safety Notes36
Delivery State36
Temperature and Humidity37
Required Tools for Unloading and Transport38
Place of Storage38
Transport Inspection and Reporting of Defects38
Unpacking the Machine38
Relocation of the Machine40
Setup and Installation42
For Your Safety42
Temperature and Humidity42
Space Requirements42
Connections43
Mains Connection44
Connection the PC44
Connection of the Air Assist44
Connect the Water Cooling System44
Operation47
Before Commissioning47
Installation and Replacement of the Laser Source48
Software48
Power On/Off49
Control Panel50
Keypad50
Description51
Shortcuts53
Changing the Lens54
Position of the Lens56
Focusing58
Maintenance59
Safety Notes59
Maintenance Schedule59
Cleaning60
Machine60
Optics in General61
Lens61
Mirror62
Motion System64
Cleaning Drawer65
Lubricating Motion System65
Troubleshooting69
Error, Cause and Remedy69
How to Create a Service File70
Contact Details72
Disassembly73
Disposal74
Appendix75
Ce 8057 Q50079
Datasheet 8057 R50080

Rayjet R500 - Position of the lens

Table of Contents