Raymarine Axiom 2 Pro 16 RVM - Surface Mounting

Surfacemounting
Followthestepsbelowtosurfacemountthedisplay
.
Important:
Inabovedeck
sinstallations,marine-gradesealantshouldbeusedtoseal
thegapbetweentheedgeofthemountingsurfaceandtheedgeofthe
display.
1.Ensureyouhavefollowedtheinstructionsforpreparingthemounting
surfaceforsurfacemounting.
2.R
outetherelevantcablestobehindthemountingsurfacecutout.
Thismaybedifficultornotpossibleoncethedisplayhasbeenmounted.
3.Removethebackingfromthesuppliedgasketandplacethestickyside
ofthegasketontotheflangeontherearofthedisplayandpressfirmly
ontotheflange.
4.Connecttherelevantcablestotherearofthedisplay.
5.Slidethedisplayintothecutoutarea.
6.Pullbackthe3cornerbungsandopenthecardreaderdoor.
7.Insertthefixingbolts,attachthewashersandnutsfromtherearand
tighten.
8.Closethe3cornerbungsandthecardreaderdoor.
Note:
Thesuppliedgask
etprovidesasealbetweenthedisplayandasuitably
flatandrigidmountingsurfaceorbinnacle.Thegasketshouldbeusedin
allinstallations.Itmayalsobenecessarytouseamarine-gradesealantif
themountingsurfaceorbinnacleisnotentirelyflatand/orhasarough
surfacefinish.
48