18 C-Series Display New Features
Pre-requisites for using the weather application
For your C-Series to display weather data, the system must be connected to an SR50
Sirius Receiver which is supplying the appropriate data. For your vessel to be displayed
and for weather reports to be available at your position, you need a fix for your boat’s
position and be within US coastal waters.
Note:
For further information on installing and commissioning a weather receiver, refer to the
SR50 Weather Receiver Installation Guide.
Adding a weather application
A weather application window is not included in the pre-configured page sets. You
therefore need to customize a page set to include one. Refer to the C-Series Reference
Manual for details.
Specifying the weather elements displayed
You can view textual reports or animated graphics and specify the weather elements
that you require:
1. Open a weather application window.
2. Press the DISPLAY GRAPHICS softkey.
3. Select the weather elements to display:
5.4 The weather display
The main features of the weather display are as follows:
D8563-1
OK
OK
Highlight required option
Enter option
Toggle ON or OFF as required
Repeat until all options set as required
To Next Page
Loading...
