Important information iii
This product uses digital chart data, bathymetric data, three-dimensional and
photographic imagery, and electronic information from the Global Positioning System
(GPS) which may contain errors. Raymarine does not warrant the accuracy of such
information and you are advised that errors in such information may cause the product
to malfunction. Raymarine is not responsible for damages or injuries caused by your
use or inability to use the product, by the interaction of the product with products
manufactured by others, or by errors in chart data or information utilized by the
product and supplied by third parties.
About this manual
This manual describes how to operate your C-Series display in conjunction with
Navionics cartography. It assumes that all peripheral equipment to be operated with it
is compatible and has been correctly installed.
This manual is intended for users of varying marine abilities, but assumes a general
level of knowledge of display use, nautical terminology and practices.
Technical accuracy
To the best of our knowledge, the technical information contained within this
handbook was correct at the time of printing. However, Raymarine cannot accept
liability for any inaccuracies or omissions it may contain.
Raymarine’s policy of continuous product improvement may mean specifications
change without notice. As a result, Raymarine cannot accept liability for any
differences between the product and this handbook.
Raymarine does not support after-sales or technical support for Navionics chart cards.
If you wish to file a report of an error or omission on a Navionics chart, please provide
the information to the Navionics web site at the link below:
http://www.navionics.com/DiscrepancyReports.asp
Raymarine does not necessarily support all the features in particular Navionics
cartography.
EMC conformance
All Raymarine equipment and accessories are designed to the best industry standards
for use in the recreational marine environment. Their design and manufacture
conforms to the appropriate Electromagnetic Compatibility (EMC) standards, but
correct installation is required to ensure that performance is not compromised.
To Next Page
Loading...
