Raymarine E12207 - Product Differences; Dimensions

2.9Productdifferences
FactorstoconsiderwhenreplacinganexistingType2drive
(M81200,M81201)withanewType2drive(E12207,E12208).
Thereareanumberofimportantdifferencesbetweenthe2drives:
•TheexistingType2hydraulicram(M81200,M81201)hasa5
degreetoleranceofmovementintheverticalplane.ThenewType
2hydraulicram(E12207,E12208)hasa10degreetolerance.
•FortheexistingType2drive(M81200,M81201)thepipesthat
transportedthehydraulicuidtotheramunitwereconnectedto
thetopoftheunit.FortheNEWType2drive(E12207,E12208),
thepipesconnecttotherearoftheunit.Youmustallowatleast
17cm(6.7in)clearanceattherearoftheunitfortheextruding
pipes.Theminimumbendradiusforthepipesis7.6cm(3in).
•Thenewdrive(E12207,E12208)canbemountedhorizontally
orvertically.
•Thehydraulicuidreservoirsuppliedwiththenewdrive(E12207,
E12208)isadifferentsizeandshape.
2.10Dimensions
Type2drive
D11868-1
147.75 mm (5.82 in)
101.5 mm (4 in)
386.5 mm (15.22 in)
1
573.5 mm (22.58 in)
108.8 mm (4.28 in)
116.0 mm (4.57 in)
1.Hydraulicramatmidstrokeposition.
18
HydraulicLinearDriveInstallationinstructions