How do I fix a noisy image on my Raymarine Monitor?
A noisy image on your Raymarine Monitor can often be resolved by ensuring the video cable is of good quality and is no longer than necessary. Using a high-quality shielded cable can also help, as can proper cable separation. Avoid running data and power cables close together to prevent electromagnetic interference (EMI).
What causes Raymarine Monitor to have problematic depth readings or sonar image?
Problematic depth readings or sonar images on your Raymarine Monitor can stem from several causes. Start by checking the sounder presets, gain, and frequency settings, as they may be inappropriate for the current conditions. Inspect the power supply voltage, as a low voltage can affect the unit's transmitting power. Ensure all cables (power, transducer, etc.) are properly connected and undamaged. Check that the transducer is correctly mounted, clean, and within 10° of vertical. If you have a transom-mount transducer, make sure it hasn’t been kicked up. Adjust scroll speed.
Why is the bearing of a target on the Raymarine Monitor radar screen incorrect?
If the bearing of a target on the Raymarine Monitor radar screen is incorrect, it's likely that the radar bearing alignment needs adjusting. Check and adjust the radar bearing alignment.
How to resolve Raymarine Monitor no signal message on screen (video image not displayed)?
If your Raymarine Monitor displays a 'No signal' message and the video image is not displayed, check that the connections are sound and free from corrosion. The problem is likely a cable or connection fault.
How to resolve Raymarine Monitor radar not initializing (Voltage control module (VCM) stuck in “sleep mode”)?
If the Raymarine Monitor radar won't initialize and the Voltage Control Module (VCM) is stuck in 'sleep mode', check the power connection at the VCM. Ensure the voltage at the input is 12/24V and the voltage at the output is 40V. The cause is likely an intermittent or poor power connection.
Why is my Raymarine Monitor showing a 'No Fix' GPS status icon?
If your Raymarine Monitor displays a 'No Fix' GPS status icon, it could be due to your geographic location or current conditions preventing a satellite fix. Check periodically to see if a fix is obtained in better conditions or another location. Ensure that external GPS connections and cabling are correctly connected and without faults. Also, make sure the GPS antenna has a clear view of the sky.
How to fix 'No Data' or 'No scanner' message on Raymarine Monitor?
If you're seeing a 'No Data' or 'No scanner' message on your Raymarine Monitor, begin by checking the radar scanner power supply cable for any damage, ensuring all connections are tight and free from corrosion. Verify the relevant fuses and breakers. Make sure the power source provides the correct voltage and current. Confirm the scanner is correctly connected to a Raymarine network switch or SeaTalkhs crossover coupler, and check the status of the Raymarine network switch. Also, ensure SeaTalkhs / RayNet cables are free from damage. Finally, check that the switch at the scanner pedestal is in the ON position.
How to fix Raymarine Monitor display behaving erratically with frequent unexpected resets?
If your Raymarine Monitor display is behaving erratically with frequent resets or system crashes, the issue might be an intermittent power problem. Check the relevant fuses and breakers, and inspect the power supply cable for damage and loose, corroded connections. Also, ensure the power source provides the correct voltage and current. As a last resort, perform a factory reset.
What to do if the Raymarine Monitor displays instrument, engine or other system data missing from some but not all displays?
If instrument or system data is missing from some Raymarine Monitor displays, but not all, it indicates a network problem. Check that all required equipment is properly connected to the network and verify the status of the Raymarine network switch.
What to do if my Raymarine Monitor touchscreen does not operate as expected?
If the Raymarine Monitor touchscreen isn't working correctly, first ensure that the touch lock is disabled using the trackpad on the home screen. The screen requires direct contact with bare fingers to operate correctly, so remove any gloves. If problems persist, calibrate the touchscreen using the setup menus. Also, saltwater deposits on the screen can cause issues, so carefully clean and dry the screen as instructed.
General| Display Size | 7 inches |
|---|---|
| Display Resolution | 800 x 480 pixels |
| Display Type | LCD |
| Touchscreen | Yes |
| Waterproof Rating | IPX6 |
| Weight | 1.5 kg |
| Operating Temperature | -15°C to 55°C |
| Networking | NMEA 2000, Ethernet |
| Storage Temperature | -30°C to +70°C (-22°F to 158°F) |
Summarizes critical warnings for safe operation and installation, including ignition sources, voltages, grounding, and general usage.
Covers installation best practices, EMC requirements, suppression ferrites, and connections to other equipment.
Discusses the use of chart cards and memory cards, including compatibility and capacity limitations.
Includes FCC and Industry Canada compliance, warranty registration, and technical accuracy disclaimers.
Explains the symbols, menu terms, and interaction methods used throughout the manual for clarity.
Details device connectivity options and how various components integrate into a networked system.
Outlines the key activities for installation and specifies the limits for system components.
Describes limitations when networking displays and details supported system communication protocols.
Defines the role of the data master and lists the components included in the product package.
Provides best practices for routing, securing, and protecting cables for optimal performance and longevity.
Details power supply requirements, circuit protection, and network connectivity options like SeaTalkhs and RayNet.
Explains how to connect GPS, AIS units, and other data sources using SeaTalkng, NMEA 0183, and NMEA 2000.
Guidance on choosing the best display placement considering ventilation, interference, viewing angles, and compass safety.
Step-by-step instructions for flush mounting the display and attaching it to the trunnion bracket.
Basic steps for powering up the unit and an overview of the physical controls and their functions.
Explains how to use the touchscreen, HybridTouch features, and navigate menus and applications.
Guides on checking GPS status, performing system diagnostics, and running the initial setup wizard.
Instructions for inserting, removing, and backing up data using memory cards.
Procedures for saving and retrieving user data (waypoints, routes, settings) and erasing them from the system.
Details on how to perform a settings reset or a full system reset to factory defaults.
Covers creating, editing, displaying, and navigating to waypoints using various methods.
Instructions on how to build, manage, navigate, and edit routes.
Details on creating, saving, reviewing, and editing tracks, including setting track intervals.
Explains the chart application's features for navigation, passage planning, and accessing cartographic data.
Describes how to display vessel position, set chart orientation (North-Up, Head-Up, Course-Up), and motion modes.
Covers options for adjusting chart detail, layers, vectors, and aerial photo overlays for display.
Instructions for engaging, disengaging, and controlling the autopilot via the multifunction display.
Explains the meaning of autopilot status icons and how to manage autopilot alarms.
Details on activating, cancelling, and managing Man Overboard (MOB) alarms and data.
Guides on accessing the alarms menu, configuring alarm behaviors, and silencing active alarms.
Explains radar functionality, scanner types (HD, SuperHD), and supported radar features.
Details on interpreting the radar screen, including range rings, targets, and status indicators.
Covers using Guard Zones and MARPA to track targets and avoid potential collisions.
Instructions for configuring scanner settings like gain, interference rejection, and bearing alignment.
Explains the AIS feature, how it works, and the necessary hardware and software prerequisites.
Guides on enabling AIS overlay and displaying target vectors to indicate movement and predicted paths.
Utilizing AIS safe zones and safety messages to enhance collision avoidance.
Covers configuring AIS settings, managing alarms, and using the Buddy Tracking feature.
Basic operation of the fishfinder, safety warnings, and how to interpret the sonar display.
Explains how to use presets, select display modes like Zoom and Bottom Lock, and adjust gain.
Using VRM markers and depth lines to measure, and setting up fishfinder alarms.
Details on configuring sounder settings, transducer selection, and calibration.
Explains how the data application displays system and instrument data using pre-configured datapages.
Guides on changing datapage order, customizing cell content, renaming, adding, and deleting datapages.
Steps to connect to a Raymarine Sirius weather receiver and access the weather application.
Explains weather symbols, storm tracking symbols, and how to interpret weather graphics.
Instructions for navigating the weather map, viewing reports, and setting watchbox alerts.
Explains how to connect a video source, view the image, and adjust video settings like aspect ratio.
Guides on enabling Wi-Fi, display streaming, and connecting an iPhone or iPad for video output.
Details on setting up WPA2 security, managing the passphrase, and selecting WiFi channels.
Instructions for enabling Bluetooth and connecting a compatible media player device.
Steps for pairing a Bluetooth device, enabling audio control, and unpairing.
Explains the thermal camera's capabilities, status icons, and how to pan, tilt, and zoom the image.
Guides on adjusting color modes, scene presets, reverse video, and setting the camera's home position.
Details on connecting a DSC VHF radio to show distress messages and GPS position data.
Instructions for connecting and pairing the Raymarine remote control unit (RCU-3).
Explains operating principles, customizing the shortcut button, and available remote control functions.
Guides on setting language preferences, units of measurement, and boat type for display customization.
Covers settings for cursor behavior, key beep, and managing shared brightness across multiple units.
Instructions for customizing on-screen data cells and the databar to display desired information.
Provides guidance on service procedures, routine equipment checks, and proper cleaning of the display.
Solutions for problems related to the system not starting up and radar initialization issues.
Troubleshooting steps for GPS fix problems, sonar image issues, and thermal camera control failures.
Addresses issues with wireless connections (Wi-Fi, Bluetooth) and problems with system data availability.
Information on contacting Raymarine customer support and accessing third-party supplier websites.
Detailed specifications for display dimensions, power requirements, and environmental operating conditions.
Technical details on display resolution, wired/wireless connections, and conformance certifications.
Lists of available transducer accessories, network cables, and video/power cables.
Lists of spare parts for e7/e7D and service parts for various Raymarine display models.
To Next Page
