Raymarine i60 - Dealer Calibration

7.4Dealercalibration
Thedealercalibrationproceduresinclude:
•UsercalibrationmenuaccessOn(default)andOff.
•DisplayResponseforwindanglereadings—
Dictatestherateatwhichtheinstrumentdisplay
respondstochangesinwindangledata.
•DisplayResponseforwindspeedreadings—
Dictatestherateatwhichtheinstrumentdisplay
respondstochangesinwindspeeddata.
•DisplayResponseforVMGreadings—Dictates
therateatwhichtheinstrumentdisplayresponds
tochangesinVMGdata.
•*BoatshowmodeOnandOff(default)(Boat
showmodeisonlyavailableondisplayssetas
repeaters).
•Resettofactorydefaults.
Note:Notavailableonthei60CHwindinstrument.
SettingaccesstotheUserCalibration
Menu-i60
Duringnormaloperation:
1.PressandholdtheDisplayandTrue/App
buttonsatthesametimeforapproximately14
seconds,untiltheDealerCalibrationpageis
displayed.
2.PresstheVMGandTackbuttonsatthesame
timetodisplaytheUserCalibrationMenu
Accesspage.
CAL
3.UsetheVMGorTackbuttonstoswitchaccessto
theUserCalibrationMenuOnandOff.
•UC1(default)—UserCalibrationmenu
enabled
•UC0—UserCalibrationmenudisabled
Note:T oexittheDealerCalibrationpagesatany
time,pressandholdtheDisplayandTrue/App
buttonsatthesametimeforapproximately2
seconds.
SettingtheresponsedelayforWind
Anglereadings
Duringnormaloperation:
1.PressandholdtheDisplayandTrue/App
buttonsatthesametimeforapproximately14
seconds,untiltheDealerCalibrationpageis
displayed.
2.PresstheVMGandTackbuttonsatthesame
timetodisplaytheUserCalibrationMenu
Accesspage.
CAL
3.PresstheDisplaybuttonuntiltheWindAngle
Responsepageisdisplayed(1pressfromthe
UserCalibrationAccessMenupage).
4.UsetheVMGandTackbuttonstosetthe
requiredlevelforWindAngleResponse.
Thedefaultlevelis12.Thelevelsavailableare1
to15withlevel1beingtheslowestupdaterate
andlevel15thequickest.
Note:T oexittheDealerCalibrationpagesatany
time,pressandholdtheDisplayandTrue/App
buttonsatthesametimeforapproximately2
seconds.
SettingtheresponsedelayforWind
Speedreadings
Duringnormaloperation:
1.PressandholdtheDisplayandTrue/App
buttonsatthesametimeforapproximately14
seconds,untiltheDealerCalibrationpageis
displayed.
2.PresstheVMGandTackbuttonsatthesame
timetodisplaytheUserCalibrationMenu
Accesspage.
CAL
3.PresstheDisplaybuttonuntiltheWindSpeed
Responsepageisdisplayed(2pressesfromthe
UserCalibrationAccessMenupage).
4.UsetheVMGandTackbuttonstosetthe
requiredlevelforWindSpeedResponse.
Thedefaultlevelis12.Thelevelsavailableare1
to15withlevel1beingtheslowestupdaterate
andlevel15thequickest.
Note:T oexittheDealerCalibrationpagesatany
time,pressandholdtheDisplayandTrue/App
buttonsatthesametimeforapproximately2
seconds.
40