Chapter 2: Installation 2-5
.
Figure 2-2: Pole Mounting Arrangement
2.3 Connections
Two versions of this unit areavailable; SeaTalk and NMEA.
NMEA Version
Theunit is normallyconnected toan NMEA systemvia a 33ft (10m)
cable terminated with a moulded 6-pin connector. Alternatively,
connection can be made to other types of NMEA connector. The
cable can be cut as necessary to the required length, or coiled and
stored out of the way.
If you have equipment with a dedicated GPS port that accepts this
connector, you should use it. If itis notpossible to use this connector,
removethe 6-pin connectorand re-connect thecable using a
D4726-1
81170_2.BOOK Page 5 Thursday, July 19, 2001 2:36 PM
To Next Page
Loading...
