Raymarine RAYSTAR 120 - Appendix A: Raystar 120 GPS Receiver Mounting Template

Appendix A: Raystar 120 GPS Receiver Mounting Template A-1
Appendix A: Raystar 120 GPS Receiver
Mounting Template
Note: Access to the underside of the mounting surface must be available to allow for se-
cure fixing.
Figure A-1 Mounting Template
Cable Exit Channel
18mm
(0.7in)
6mm (0.25") dia.
for cable only
19mm (0.75") dia.
for NMEA plug
6mm (0.25") dia.
2 positions
18mm
(0.7in)
36mm (1.4in)
36mm (1.4in)
D4194-1
81170_2.BOOK Page 1 Thursday, July 19, 2001 2:36 PM