Raymarine Remote display User Manual

Setup and Calibration
19
www.raymarine.com
An ON/OFF toggle (for example the Cross Track Error alarm can be
either ON or OFF).
To edit a numeric parameter value:
Press the button. The value data will begin to flash.
Use the and buttons to adjust the value.
Press the button again to set the new value.
To reset a memory value:
Press the button. The parameter is reset.
To select a parameter option from a list:
Press the button. The parameter option will begin to flash.
Use the and buttons to select the option required.
Press the button again to set the new option.
To toggle between ON/OFF parameter settings:
Press the button. The setting will toggle between ON and OFF.

Raymarine Remote display Specifications

General

Brand	Raymarine
Model	Remote display
Category	Marine Equipment
Language	English