Chapter 2: Installing the system 21
2.5 Connecting power & drive cables to the Course
Computer
Power
The SPX-5 Wheel system needs a 12 V dc supply.
CAUTION: Ensure correct supply voltage
Do NOT connect 24 V to the Course Computer, or damage to the
product could occur.
Circuit breaker/fuse
Protect the power supply for the SPX-5 Wheel system with a 10 A fuse or circuit
breaker.
Cable
Using the information given at
Power cable requirement
on
page 8
, obtain the
required length of the appropriate cable to connect power from the boat’s distribution
panel to the Course Computer.
Connection procedure
A B
D10505-1
Power supply
Red Black
Fuse or
circuit
breaker
Distribution
panel
Drive unit
Brown
Blue
87074_2.book Page 21 Wednesday, November 21, 2007 3:55 PM
To Next Page
Loading...
