Raymarine SPX-5 - 2.10 Final Checks; Secure All Cables; 2.11 Commission System Before Use

30 SmartPilot X-5 Wheel Installation & Setup Guide
2.10Final checks
When you have completed all necessary installation procedures, but before you
apply power to the system, ensure all equipment and connections are properly
secured.
Secure all cables
To prevent strain on the connector blocks, secure the cables to the Course Computer
with cable ties as shown below.
2.11Commission the system before use
The SPX-5 Wheel system must be commissioned prior to use, in accordance with the
instructions in
Chapter 3:Commissioning & setup . For new systems this involves
calibrating the system, which is a safety-critical action.
D10396-1
87074_2.book Page 30 Wednesday, November 21, 2007 3:55 PM