Raymarine SPX-5 - Accessing Dealer Calibration; Seatrial Calibration Lock; Vessel Type Setting

52 SmartPilot X-5 Wheel Installation & Setup Guide
Seatrial calibration lock
This screen controls the access to Seatrial calibration.
Vessel type
Selecting the correct vessel type, enables the SPX-5 Wheel system to set appropriate
values for other calibration settings, to give optimum performance. Refer to the table
on page 57 for default values.
The correct setting for the SPX-5 Wheel system is
SAIL BOAT. This should be set
when commissioning the SPX-5 Wheel system.
Screen text Options
CAL LOCK OFF Calibration lock off – Seatrial calibration can be accessed (default)
CAL LOCK ON Calibration lock on – Seatrial calibration cannot be accessed
Accessing
Dealer Calibration
Dealer Calibration
D10603-1
To exit & save changes
2 seconds
2 seconds
(saves changes)
+
or
or
To adjust values
87074_2.book Page 52 Wednesday, November 21, 2007 3:55 PM