66 ST3000 Wheel Drive Autopilot - Owner’s Handbook
6 Adjusting Wheel Pilot Settings
Calibration Level 11: Boat’s current latitude
When you have switched on heading error correction (Level 10), you
need to use Calibration Level 11 to input the boat’s current latitude
(to the nearest degree).
Set the latitude using the
-1, +1, -10 and +10 keys.
Note: If the correction is switched off in Calibration Level 10 (i.e. set
to ‘
0’),Level 11 will be omitted. When you press the AUTO key in
Calibration Level 10 you will advance to Level 13.
Controlling access to calibration
You can prevent unauthorized access to calibration as follows:
1. Press and hold
-1 and STANDBY together for 10 seconds until the
display shows
CAL OFF:
2. Toggle the calibration access between OFF and On using the -1 and
+1 keys.
3. Store the setting by pressing
-1 and standby for 10 seconds until
the wheel drive returns to normal operation.
D214-1
81194_1.book Page 66 Wednesday, July 25, 2001 12:10 PM
To Next Page
Loading...
