Chapter 2: Using the Wheel Pilot 11
2 Using the Wheel Pilot
Changing course
In Auto mode, use the -1 and -10 (port) and +1 and +10 (starboard)
keys to change course in steps of 1° and 10°.
For example: press -10 three times for a 30° course change to port:
Port Starboard
or
or
D5611-1
D5612-1
x 3
Original
course
30˚ to port
81194_1.book Page 11 Wednesday, July 25, 2001 12:10 PM
To Next Page
Loading...
