Raymarine ST70+ - Parts Not Supplied; Optional Cabling and Connectors

8 ST70+ User Reference Manual
Parts not supplied
You will need the following tools:
Optional cabling and connectors
Each ST70+ product is supplied with one SeaTalk
ng
spur cable and one backbone
blanking plug and should be connected to a SeaTalk
ng
system as described in the
SeaTalk
ng
System Installation Guide (supplied with the SeaTalk
ng
backbone kit).You
may need other SeaTalk
ng
components to achieve this.
Figure 1-6: Optional SeaTalk
ng
parts
D11409-1
Power
drill
Jig
saw
92 mm (3
9
/16 in)
hole cutter
5 mm (
3
/16 in) drill bit8 mm (
5
/16 in) drill bit
64 mm (2
1
/2 in)
hole cutter
D11410-1
Spur cable
Backbone kit
Part numbers
Part number A25062
A06038 - 1 ft 3 in (400 mm)
A06039 - 3 ft 3 in (1 m)
A06040 - 9 ft 10 in (3 m)
A06041 - 16 ft 4 in (5 m)
Backbone cable -
16 ft 4 in (5 m), (x 2)
65 ft 7 in (20 m)
T piece, (x 4)Backbone terminator, (x 2)
Power cable
Backbone Extender
Part Number A06030
87099_1.book Page 8 Thursday, March 12, 2009 10:18 AM