Raymarine ST70+ - Selecting Language; Setting Vessel Type

Chapter 3: Commissioning Procedures 21
Selecting language
Scroll to select the required language.
CAUTION:
Be sure to select the correct Language. If you select the wrong language,
the ST70+ system will be difficult to use.
If you are sure you have selected the language you want, press OK to confirm the
selection, to display the ‘Welcome’ screen.
When you are ready to proceed, press
OK to display the Vessel Type menu.
Setting Vessel Type
The Vessel Type menu enables you to automatically
apply the optimum system settings for your vessel
type. The options are:
*Power Cruiser settings. Note that the Power Cruiser settings apply as follows:
• Power Cruiser 1 - vessels capable of speeds up to 12 knots.
• Power Cruiser 2 - vessels capable of speeds up to 30 knots.
• Power Cruiser 3 - vessels capable of speeds greater than 30 knots.
• Race Sail • Inboard Speed Boat
• Sail Cruiser • Power Cruiser 1*
• Catamaran • Power Cruiser 2*
• Workboat • Power Cruiser 3*
•RIB •Sport Fishing
• Outboard Speed Boat • Pro Fishing
D11407-1
Selected display
y
Language
English (UK)
Press OK to select
i
D11141-1
Vessel Type
Inboard Speedboat
Selecting vessel type helps us to
configure your system.
Press OK to select
87099_1.book Page 21 Thursday, March 12, 2009 10:18 AM