Chapter 3: Commissioning Procedures 23
5. Press
OK
to confirm the display type and dis-
play the
Assign group
page.
6. Scroll to the name of the group to which you
want to assign the display.
• Pilot Controller group name options are:
Pilot-1
,
Pilot-2,
Pilot-3
,
Pilot-4
and
Pilot-5
• Instrument group name options are:
Inst-Helm1
,
Inst-Helm2
,
Inst-Cockpit
,
Inst-Flyb.
,
Inst-Mast
,
Inst-1
,
Inst-2
,
Inst-3
,
Inst-4
,
Inst-5
,
Inst-6
,
Inst-7
,
Inst-8
,
Inst-9
,
Inst-10
,
Inst-11
,
Inst-12
,
Inst-13
,
Inst-
14
and
Inst-15.
7. Press
OK
to save the group assignment and
display the
Assign order in group
page. Each
display in a group has a discrete number, and
these numbers determine the order in which
displays are selected within the group during
normal operation, when the Select Display but-
ton is used.
8. Scroll to the required number.
9. Press
OK
to save the group settings and dis-
play the
Link keypad to group
page.
10. If you have not allocated keypads to the group containing the display you are set-
ting up:
i. Press
OK
at a keypad you want to link to this group.
ii. Wait until the confirming popup disappears.
iii. Repeat i and ii for each keypad you want to link to this group.
Note: Remember you can only link Instrument keypads to In-
strument groups, and Pilot Controller keypads to Pilot
Controller groups.
11. When you have allocated all the required key-
pads to this group, press
MENU
to save the
group settings and display the
Configure this
display
page.
12. Repeat steps 3 to 11 for each display.
13. When all displays are set as you want, and with
the
Configure this display
page displayed, press
MENU
, to leave the Setting dis-
play types and groups procedure, and display either:
•A
Time & date
summary
page, if your system provides GPS information,
•or
•A
Units Summary
page if GPS information is not available.
i
D11145-1
Press OK to accept
Assign group
Assign into a group of one or more displays. All
displays must be the same type.
Pilot-2
i
D11146-1
Press OK to accept
Assign order in group
2
Assign the order of this display
within the group.
D11147-1
Press MENU to finish
Link keypad to group
Press OK on each
keypad that you want
to link to this display
group
87099_1.book Page 23 Thursday, March 12, 2009 10:18 AM
To Next Page
Loading...
