Chapter 3: Commissioning Procedures 29
2. Press
OK
to display the
Rudder Check
(port)
page.
3. Turn the wheel fully to port.
4. Press
OK
, to display the
Rudder Check
(star-
board) page.
5. Turn the wheel fully to starboard.
6. Press OK, to display the
Rudder Check
page
(center) again.
7. Press
OK
to display the
Rudder Check Task
Complete
page.
8. Press
OK
to display the
Motor Check
entry
page.
i
D11168-1
Press OK to accept
Rudder Check
Turn the wheel hard to PORT and
press OK. Press CANCEL to exit.
i
D11169-1
Press OK to accept
Rudder Check
Turn the wheel hard to STARBOARD
and press OK. Press CANCEL to exit
i
D11170-1
Press OK to accept
Rudder Check
Center the rudder and press OK.
Press CANCEL to exit.
i
D11171-1
Press OK to continue
Rudder Check
Task Complete - success.
Press CANCEL to exit.
i
Press OK to continue
Motor Check
IS IT SAFE TO TAKE THE HELM!
Press CANCEL to exit
D11610-1
87099_1.book Page 29 Thursday, March 12, 2009 10:18 AM