RBR CncGcoder HD - Adding a New Machine; Selecting a Machine; Editing an Existing Machine; Deleting a Machine

Using the CncGcoder
®
Adding a New Machine
1. Tap on the machine name box
under Machine
Name to see a flashing cursor. Use the on-screen keyboard or
the keypad to enter a machine name.
2. Select the communications settings from the dropdown menus
along the right side of the screen. Select the baud rate,
number of stop bits, and type of handshaking to match the CNC.
Choose between ISO (7 data bits, even parity) and ASCII (8 data
bits, no parity) data format. If necessary, change the advanced
settings. (See Setting the Advanced Settings)
3. Tap the Save button
to save the settings.
Selecting a Machine
1. Select a machine from the list of machines. The selected machine
will appear in the machine name box
below
Machine Name.
2. Tap the Select Machine button
to choose the machine
and return to the CncGcoder
®
main screen.
Editing an Existing Machine
1. Select a machine from the list of machines. The selected machine
will appear in the machine name box
below
Machine Name.
2. Change the communications settings from the dropdown menus
along the right side of the screen. Select the baud rate,
number of stop bits, and type of handshaking to match the CNC.
Choose between ISO (7 data bits, even parity) and ASCII (8 data
bits, no parity) data format. If necessary, change the advanced
settings. (See Setting the Advanced Settings)
3. Tap the Save button
to update the settings.
Deleting a Machine
1. Select a machine from the list of machines. The selected machine
will appear in the machine name box below
Machine Name.
2. Tap the Erase button
to delete the machine.
CncGcoder® HD Manual
14