Revisions
CncGcoder® HD Manual
23
Revisions
Version 1.1.0.2
1. File name can now be up to 50 characters.
2. File list defaults to All Files.
3. Switching Machines does not automatically switch to the default directory.
4. When a directory cannot be found, switch to root directory.
5. When a file can not be found, go back to last entered file path.
6. Does not erase file name while navigating through file list.
7. File name editable on main screen.
8. New SD card write protect errors.
9. Receiving characters timeout increased from 2 seconds to 4 seconds.
To Next Page
Loading...