RCF M 20 Series - OUTPUT PROCESSING

RCF spa
M 20X Digital Mixer Reference Guide
24
OUTPUT PROCESSING
A complete processing section is available on all outputs: a flexible 8-band parametric EQ with several selectable modes,
that also allow different slopes, a delay with up to 85 meters compensation, a compressor/limiter. A stereo 30-band
graphic equalizer is available on the MAIN outputs for precise correction of the overall frequency response. Extensive
routing options allows flexible use of physical outputs.
The MIX [1:8] output processing screen is divided into the following tabs:
 CHANNEL VIEW
 PARAMETRIC EQ
 DYNAMICS
The Main LR processing screen is divided into the following tabs:
 CHANNEL VIEW
 GRAPHIC EQ
 PARAMETRIC EQ
 DYNAMICS
Similarly to the input channels, the left side of the screen doesn’t change when navigate between the processing pages
of the channel. The left column is the Channel strip that shows the principal information of the selected channel: name,
meter bar, fader level value, balance value (for the stereo channels) and on-off processing status bar.
Channel Name
Meter bar
Fader Level Value
Balance Value
On-Off
processing
status bar
Processing Tabs: Touch the block or press SEL to
change view. The yellow outline indicate the
current view. Each block also shows the preview
of processing settings.
Output
Channel
Encoder parameters change
accordingly to the processing page
Current Page