RCF M 20 Series - DYNAMICS - Master Compressor;Limiter

RCF spa
M 20X Digital Mixer Reference Guide
28
DYNAMICS – Master Compressor/Limiter
All outputs are equipped with a Dynamics processor configured as a Compressor/Limiter
DYN parameters assigned to the Encoders are:
Switch the
DYN On or
Off using the
on-screen
ON button
Viewing
Area
Encoder
Assignment
ATTACK: set the value of the Attack Time in the range [1: 1000] ms
RELEASE: set the value of the Release Time in the range [10: 1000] ms
THREASHOLD: set the value of the compressor threshold in the range [-80: 0] dB
RATIO: set the value of the Ratio in the range [1: 20]
For the output DYN are available 100
locations where save and recall your
custom settings.