RCF M 20 Series - Modulation

RCF spa
M 20X Digital Mixer Reference Guide
33
Modern delay parameters:
 Offset (offset time related to main Time) instead of Feedback
 LoCut (low cut filter frequency) instead of Hi Cut.
Dual delay parameters:
 Factor (1/2, 1/3, 1/4, 1/6, 1/8 and 1/16) instead of Feedback
 Feedback 2 (% of delay 2 feedback) instead of Hi Cut
MODULATION
The M Series provides a Modulation processor available on Send FX4. The Modulation processor can be configure as
Chorus-Flanger or as Tremolo effect.
Chorus-Flanger parameters:
 Rate (frequency swing)
 Width (amplitude)
 Depth (depth swing)
 Feedback (% effect feedback)
 Blend (% mix between dry signal and processed)
Tremolo parameters:
 Rate (frequency rate)
 Depth (depth swing)