25
6.8 STATISTICS PROGRAMMING
In PRG (4 + KEY) press %+ until Daily stat. (Daily Statistics). Press
CASH to start programming:
A) Choose through keys %+ and
%- if DEPARTMENTS report
printout must be enabled. Choose
SI (YES) or NO then press CASH.
B) Choose through keys %+ and %-
if the CLERKS report printout must
be enabled. Choose SI (YES) or NO
then press CASH.
C) Choose through keys %+ and %-
if the VAT report printout must be
enabled. Choose SI (YES) or NO
then press CASH.
D) Choose through keys %+ and %-
if the TIME report printout must be
enabled. Choose SI (YES) or NO
then press CASH.
E) Choose through keys %+ and %-
if the FINANCIAL report printout
must be enabled. Choose SI (YES)
or NO then press CASH.
The display leaves the programming displaying again “Daily stat.”. To exit
the function, press VOID REC./VOID .
DEPARTMENTS
YES / <NO>
CLERKS
YES / <NO>
VAT
YES / <NO>
HOURLY
YES / <NO>
FINANCIAL
YES / <NO>
26
6.9 DATE/TIME
In PRG (4 + KEY) press %+ until Date/Time is displayed. Press CASH
to start programming (after the fiscal daily report):
A) Enter a value from 1 trough 31
referred to today, then press
CASH
B) Enter a value from 1 to 12
referred to this month then press
CASH
C) Enter this year with 4 figures,
then press CASH
D) Enter a value from 0 to 23
referred to the current time, and
then press CASH
E) Enter a value from 0 to 59
referred to the minutes of the
current hour, and then press
CASH
The display exits the programming displaying again “Date/Time”. To exit
press VOID REC./VOID .
NOTE: if the display, after entering the date and the time, showed the
following message, it would mean that any set date, in respect of the last
fiscal daily report done, is higher than tree days.
DAY:
1
MONTH:
1
YEAR:
2005
HOURS:
8
MINUTES:
30
To Next Page
